Sony XDR-S61D Radio User Manual

The Sony XDR-S61D is a portable digital FM/AM radio featuring PLL quartz-synthesized tuning, 30 station presets (20 FM, 10 AM), a large backlit LCD display, telescopic antenna, built-in speaker, headphone jack, alarm clock with snooze function, sleep timer, and battery/AC power operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using Presets and Memory 8. Clock and Alarm Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital tuner with LCD display, telescopic antenna, speaker, control buttons, headphone jack, DC input.

Feature	Description
Telescopic Antenna	For FM reception; extend fully for best signal
LCD Display	Shows frequency, time, preset number, battery status
Headphone Jack (3.5mm)	For private listening
DC Input Jack	For AC adapter (not included)
Battery Compartment	Holds 3 x AA batteries (not included)
POWER Button	Turns radio on/off
TUNING / SELECT Knob	Manual tuning and menu navigation
BAND Button	Switches between FM and AM bands
PRESET / MEMORY Button	Stores and recalls station presets
ALARM / SLEEP Button	Sets alarm and sleep timer functions

Installation

Unpack and inspect contents. Place on stable, flat surface.

Install batteries: Open compartment, insert 3 AA batteries observing correct polarity.
Extend antenna: Fully extend telescopic antenna for FM reception.
Connect AC adapter (optional): Plug DC end into radio, AC plug into wall outlet.
Connect headphones (optional): Plug into 3.5mm jack for private listening.

WARNING! Use only recommended battery type. Do not mix old and new batteries.

First-Time Setup

Power on radio; set initial time and station presets.

Set the clock: Hold CLOCK button, use TUNING knob to set hour and minute.
Select band: Press BAND button to choose FM or AM.
Tune stations: Use TUNING knob to find desired station.
Save presets: Tune to station, press and hold PRESET, select preset number (1-30).

CAUTION! Keep away from moisture and extreme temperatures.

Specifications

Tuning System: PLL Quartz Synthesized.
Frequency Range: FM: 87.5 - 108 MHz, AM: 530 - 1710 kHz.
Preset Memory: 30 stations (20 FM, 10 AM).
Power Supply: 3 x AA batteries or DC 4.5V AC adapter.
Speaker: Built-in dynamic speaker.
Display: Backlit LCD with time, frequency, preset.
Output: Headphone jack (3.5mm stereo).
Dimensions: Approx. 150mm W x 95mm H x 30mm D.
Operating Temp: 5°C to 35°C (41°F to 95°F).

Controls and Settings

Front Panel: POWER, BAND, TUNING knob, PRESET, ALARM/SLEEP, CLOCK. Display shows time, frequency, battery icon, preset number.

Basic Operations: POWER to turn on/off. BAND to switch FM/AM. TUNING knob to manually tune. VOLUME knob on side. PRESET to recall saved stations. MENU (if available) for advanced settings like display contrast.

Clock Settings: Hold CLOCK button, adjust with TUNING. Alarm: Press ALARM, set time and source (radio or buzzer). Sleep Timer: Press SLEEP, set duration (15-90 minutes).

Connecting Devices

Headphones: 3.5mm stereo plug. AC Adapter: DC 4.5V, center positive.

Ensure radio is off before connecting devices.
Plug headphones into jack for private listening (disables speaker).
Connect AC adapter to DC input jack and wall outlet for continuous power.

Tip: Use AC adapter to conserve battery life during extended use.

Using Presets and Memory

Store up to 30 favorite stations for quick access.

Tune to desired station using BAND and TUNING.
Press and hold PRESET button until display blinks.
Rotate TUNING knob to select preset number (1-30).
Press PRESET again to confirm and store.
Recall: Briefly press PRESET, then rotate TUNING to select preset number.
Direct access: Press and hold numeric preset button if available on remote (not included).

Note: Presets are retained in memory when batteries are removed or power is lost.

Clock and Alarm Functions

Set alarm to wake to radio or buzzer tone.

Set current time: Hold CLOCK, adjust hour/minute with TUNING, press CLOCK to set.
Set alarm time: Press ALARM, use TUNING to set hour/minute, press ALARM to confirm.
Select alarm source: In alarm setting, choose RADIO or BUZZER.
Activate/deactivate: Press ALARM to toggle alarm ON/OFF (icon shows on display).
Snooze: Press any button during alarm to snooze for 5 minutes.
Sleep timer: Press SLEEP, select duration (15, 30, 45, 60, 90 min), radio turns off automatically.

WARNING! Alarm will not function if radio is powered off.

Care & Cleaning

Remove batteries before cleaning. Use soft, dry cloth. Do not use solvents or abrasives.

CAUTION! Avoid water and liquid cleaners. Keep antenna fully retracted when not in use or during transport.

Regulatory Information

FCC Part 15: Class B digital device; complies with limits for residential use. This device complies with Part 15 of the FCC Rules. Copyright © Sony Corporation. For support, visit www.sony.com/electronics/support or contact Sony Customer Service at 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Dead batteries, incorrect adapter	Replace batteries; ensure correct AC adapter (4.5V DC).
Poor FM reception	Antenna not extended, location	Fully extend antenna; reposition radio near window.
Display is dim or blank	Battery low, backlight off	Replace batteries; check display settings.
Alarm does not sound	Alarm off, volume low	Ensure alarm is activated; increase volume.
Presets lost	Batteries removed too long	Re-enter preset stations; replace batteries promptly.
No sound from speaker	Headphone plugged in, mute	Unplug headphones; check volume level.

Reset: Remove batteries and AC adapter for 1 minute to reset microcomputer.

Service: 1-800-222-7669; www.sony.com/electronics/support