Sony XDR-S41D Radio User Manual

The Sony XDR-S41D is a compact digital AM/FM radio with advanced features including digital tuning, preset stations, alarm functions, sleep timer, and battery/AC power operation. It offers clear sound quality, an easy-to-read LCD display, and intuitive controls for both home and portable use. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using Preset Stations 8. Alarm & Timer Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital AM/FM tuner, LCD display, Preset buttons, Alarm/Sleep timer, Headphone jack, AC power adapter port, Telescopic antenna.

Feature	Description
Digital Tuning	Precise station selection with auto-scan
Preset Stations	Store up to 20 favorite AM/FM stations
Alarm Function	Wake to radio or buzzer with snooze
Sleep Timer	Auto power-off after 15-90 minutes
Headphone Jack	For private listening (3.5mm)
Power Options	AC adapter or 3x AA batteries (not included)
LCD Display	Shows time, station frequency, and mode
Telescopic Antenna	Extendable for improved FM reception
VOLUME Control	Adjusts sound level
POWER	Turns radio on/off

Installation

Unpack and inspect contents. Place on stable, dry surface.

Insert batteries: Open battery compartment, install 3 AA batteries observing polarity.
Connect AC power: Plug adapter into DC IN 4.5V port and wall outlet (for home use).
Extend antenna: Pull up telescopic antenna for FM reception.
Position radio: Keep away from metal objects and electronic devices for best reception.

WARNING! Use only Sony recommended AC adapter (4.5V). Do not mix old and new batteries.

First-Time Setup

Power on radio; set initial preferences.

Set time: Press and hold CLOCK SET, use TUNING/+/- to adjust, press CLOCK SET to confirm.
Select band: Press BAND to toggle between AM and FM.
Auto-scan stations: Press and hold TUNING/+ or - for 2 seconds to scan and stop at strong stations.
Adjust volume: Turn VOLUME knob to desired level.

CAUTION! Place radio on stable surface; avoid extreme temperatures.

Specifications

Tuning Range: FM 87.5-108 MHz, AM 530-1710 kHz.
Power Supply: AC 120V 60Hz (adapter) or DC 4.5V (3x AA batteries).
Speaker: Built-in mono speaker.
Display: LCD with backlight (time, frequency, battery indicator).
Preset Memory: 20 stations (10 AM, 10 FM).
Alarm: Daily alarm with snooze (approx. 10 minutes).
Sleep Timer: 15, 30, 45, 60, 90 minutes options.
Dimensions: Compact portable design.
Operating Temp: 5°C to 35°C (41°F to 95°F).

Controls and Settings

Front Panel: POWER, VOLUME, TUNING/+, TUNING/-, BAND, PRESET, DISPLAY, ALARM SET, SLEEP.

Top/Side: Telescopic antenna, Headphone jack, DC IN 4.5V port.

Tuning: Manual with TUNING/+/- or auto-scan (hold 2 sec). Presets: Store by tuning to station, hold PRESET, press number (1-10). Display: Press DISPLAY to toggle between time and frequency. Alarm: Set via ALARM SET button, choose radio/buzzer. Sleep: Press SLEEP repeatedly to select duration.

Connecting Devices

Headphones: Plug into 3.5mm jack for private listening. AC Power: Use provided adapter.

Ensure radio is off before connecting headphones.
Insert headphone plug fully into jack.
Connect AC adapter to DC IN port and wall outlet for continuous power.

Tip: Disconnect headphones to restore speaker sound.

Using Preset Stations

Store and recall up to 20 AM/FM stations.

Tune to desired station using TUNING/+ or -.
Hold PRESET button until display blinks.
Press a number button (1-10) to assign station to that preset.
Recall: Press PRESET once, then press assigned number.
Switch bands: Press BAND to access AM or FM presets separately.

Note: Presets are retained during power-off if batteries are installed.

Alarm & Timer Functions

Alarm: Set wake-up time and source (radio or buzzer).

Press and hold ALARM SET, use TUNING/+/- to set hour/minute.
Press ALARM SET to choose alarm type (radio symbol or bell icon).
Press ALARM SET again to confirm; alarm icon appears on display.
Snooze: Press any button during alarm to pause for ~10 minutes.

Sleep Timer: Auto power-off. Press SLEEP repeatedly to cycle through 15, 30, 45, 60, 90, OFF. Timer icon shows on display.

Care & Cleaning

Unplug adapter and remove batteries before cleaning. Use soft, dry cloth; avoid liquids.

CAUTION! Do not use solvents or abrasive cleaners. Keep away from water and high humidity.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Batteries/adapter	Check battery polarity; ensure adapter plugged in securely.
Poor FM reception	Antenna position	Fully extend telescopic antenna; reposition radio.
AM stations weak	Interference	Move away from electronics; rotate radio for best signal.
Alarm not sounding	Settings/power	Verify alarm set correctly; ensure power source active.
Display dim or blank	Battery low	Replace batteries; connect AC adapter.
No sound from speaker	Headphone jack/volume	Disconnect headphones; increase volume.

Reset: Remove batteries and adapter for 1 minute to reset microcomputer.

Service: 1-800-222-7669; www.sony.com/electronics/support