Sony XDR-S16DBP Radio User Manual

The Sony XDR-S16DBP is a compact digital AM/FM radio with advanced tuning features, digital display, preset memory stations, alarm clock functions, sleep timer, and battery/AC power options. Designed for easy operation and clear sound, it includes features like auto/manual tuning, stereo/mono switching, and a backlit LCD for visibility. Below are key sections covering safety, features, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Functions 6. Tuning and Presets 7. Alarm and Timer Functions 8. Power Options 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital AM/FM tuner, LCD display with backlight, Preset memory buttons, Alarm clock, Sleep timer, Headphone jack, AC power adapter port, Telescopic antenna.

FeatureDescription
Digital AM/FM tunerPrecise digital tuning with auto/manual scan
LCD display with backlightShows frequency, time, preset number, and mode
Preset memoryStore up to 10 AM/FM stations for quick access
Alarm clockDaily alarm with radio or buzzer option
Sleep timerAuto shut-off after 15 to 90 minutes
Headphone jack (3.5mm)For private listening
AC power adapter portFor use with included AC adapter
Telescopic antennaExtendable for improved FM reception
Stereo/Mono switchSwitch to mono for weak FM signals
Battery operationRuns on 4 x AA batteries (not included)

Installation & Setup

Unpack and inspect contents. Place on stable, flat surface.

  1. Install batteries: Open battery compartment, insert 4 AA batteries observing polarity.
  2. Connect AC power: Plug adapter into DC IN port and wall outlet (optional).
  3. Extend antenna: Fully extend telescopic antenna for best FM reception.
  4. Position radio: Keep away from metal objects and electronic devices to reduce interference.

WARNING! Use only recommended batteries or AC adapter. Do not mix old and new batteries.

First-Time Operation

Power on radio; set initial preferences.

  1. Set time: Press and hold CLOCK button, use TUNING +/- to set hour/minute.
  2. Select band: Press BAND button to toggle between AM and FM.
  3. Auto-tune stations: Press and hold TUNING + or - for auto-scan; release to stop.
  4. Set presets: Tune to desired station, press and hold a number (1-10) to store.
  5. Adjust volume: Use VOLUME knob or buttons.

CAUTION! Avoid placing near heat sources or in humid environments.

Specifications

Controls and Functions

Front Panel: POWER button, VOLUME knob, TUNING +/- buttons, BAND button, PRESET buttons (1-10), CLOCK button, ALARM button, SLEEP button, DISPLAY button.

Display Icons: AM/FM indicator, preset number, alarm on, sleep timer active, battery low.

Basic Functions: POWER turns radio on/off. VOLUME adjusts sound level. BAND switches between AM/FM. TUNING +/- manually changes frequency. DISPLAY toggles backlight on/off. CLOCK enters time set mode. ALARM sets alarm time and mode. SLEEP sets sleep timer duration. PRESET buttons recall stored stations.

Tuning and Presets

Auto Tuning: Press and hold TUNING + or - to scan; release at desired station. Manual Tuning: Press TUNING + or - briefly to step frequency.

  1. Store preset: Tune to station, press and hold a PRESET button (1-10) until beep.
  2. Recall preset: Press the corresponding PRESET button.
  3. Clear preset: Store a new station over old one.
  4. Stereo/Mono: In FM mode, press and hold BAND to switch (STEREO icon appears).

Tip: For weak FM signals, switch to mono and adjust antenna direction.

Alarm and Timer Functions

Alarm Setting:

  1. Press ALARM button; ALARM icon flashes.
  2. Use TUNING +/- to set alarm time.
  3. Press ALARM again to select sound (radio or buzzer).
  4. Press ALARM to confirm; icon stays lit.
  5. To disable, press ALARM until icon turns off.

Sleep Timer:

  1. Press SLEEP repeatedly to cycle through 15, 30, 45, 60, 90 minutes.
  2. SLEEP icon appears; radio turns off after set time.
  3. Cancel by pressing SLEEP until icon disappears.

Note: Alarm works in standby mode; ensure time is set correctly.

Power Options

Battery Operation: Install 4 AA batteries. Low battery icon appears when power is low. AC Operation: Connect included adapter to DC IN port and wall outlet.

Power Saving: Auto shut-off in battery mode after 20 minutes if no operation (can be disabled in settings).

WARNING! Remove batteries if not using for extended periods to prevent leakage.

Care & Maintenance

Unplug AC adapter before cleaning. Use soft, dry cloth; avoid liquids.

Battery Care: Replace all batteries at same time. Do not recharge non-rechargeable batteries.

CAUTION! Do not expose to extreme temperatures or moisture. Keep antenna fully extended when in use.

Regulatory Information

FCC Compliance: This device complies with Part 15 of FCC Rules. Operation is subject to interference that may cause undesired operation. ICES-003: Complies with Canadian ICES-003. Copyright © Sony Corporation. For support, visit www.sony.com/electronics/support or contact 1-800-222-7669.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerBatteries/AC adapterCheck battery polarity; ensure AC adapter plugged in securely.
Poor FM receptionAntenna positionExtend antenna fully; reposition radio; switch to mono mode.
AM stations weakInterferenceMove away from electronics; rotate radio for better reception.
Alarm not soundingSettings/volumeVerify alarm is enabled and time set; check volume level.
Display dim or blankBacklight/batteriesPress DISPLAY to turn backlight on; replace batteries if low.
Presets lostBattery removalPresets are retained for a short time after battery removal; reprogram if needed.

Reset: Remove batteries and AC adapter for 5 minutes to reset microcomputer.

Service: 1-800-222-7669; www.sony.com/electronics/support

Sony XDR-S16DBP Radio User Manual © - All Rights Reserved 2025