Sony XDR-S10HDIP Radio User Manual

The Sony XDR-S10HDIP is a compact HD Radio with IPX4 water resistance, built-in Bluetooth for wireless audio streaming, support for AM/FM and HD Radio stations, USB port for charging devices, auxiliary input, and a backlit LCD display. It features one-touch tuning, preset stations, sleep timer, and alarm functions. Powered by AC adapter or batteries for portable use. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using Bluetooth & USB 8. Presets & Memory 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: HD Radio tuner, Bluetooth module, LCD display, Speaker, USB charging port, AUX IN jack, Power input.

Feature	Description
HD Radio Tuner	Receives digital AM/FM HD Radio broadcasts
Bluetooth	Wireless audio streaming from smartphones/tablets
LCD Display	Backlit screen showing station, time, and mode
USB Charging Port	Output for charging mobile devices (5V/1A)
AUX IN Jack	3.5mm input for external audio sources
Power Input	For AC adapter connection
Battery Compartment	Holds 4 AA batteries for portable operation
Tuning Knob	Manual tuning of AM/FM/HD stations
Preset Buttons	6 memory presets for quick station access
Power Button	Turns radio on/off

Installation

Unpack and inspect contents. Place on stable, dry surface.

Insert batteries: Open compartment, insert 4 AA batteries observing polarity.
Connect AC adapter: Plug adapter into power input and wall outlet.
Extend antenna: Fully extend telescopic antenna for best reception.
Connect audio sources: Use AUX IN for external devices.

WARNING! Do not expose to excessive moisture despite IPX4 rating. Use correct adapter only.

First-Time Setup

Power on radio; follow display prompts.

Set time: Press and hold CLOCK button, use TUNING to set time.
Scan for stations: Press BAND to select AM/FM, then AUTO SCAN to store stations.
Set presets: Tune to desired station, press and hold preset button (1-6).
Pair Bluetooth: Enter pairing mode, select "XDR-S10HDIP" on your device.

CAUTION! Keep away from heat sources. Ensure ventilation around unit.

Specifications

Radio Bands: AM, FM, HD Radio.
Bluetooth: Version 4.2, A2DP profile support.
Water Resistance: IPX4 (splash resistant).
Power Sources: AC adapter (120V), 4x AA batteries.
USB Output: 5V DC, 1A max.
Audio Output: Built-in speaker, 3.5mm headphone jack.
Display: Backlit LCD with station info and clock.
Presets: 6 stations (AM/FM/HD).
Dimensions: Compact portable design.

Controls and Settings

Front Panel: POWER, TUNING knob, BAND, PRESET 1-6, MENU, ENTER.

Top Panel: VOLUME knob, BLUETOOTH button, ALARM, SLEEP, CLOCK.

Tuning: Manual with knob or AUTO SCAN. Audio: Volume control, tone settings in MENU. Clock: Set time/alarm. Bluetooth: Pairing mode, device list management. Display: Adjust contrast, backlight timeout. System: Factory reset, firmware info.

Connecting Devices

Bluetooth: Enable pairing, connect from device. AUX: 3.5mm cable to audio source. USB: Charge phones/tablets.

Ensure radio is on and in correct mode (BT for Bluetooth).
For AUX, press MODE until "AUX" appears on display.
For charging, connect USB cable to device and radio's USB port.

Tip: Fully extend antenna when using radio functions for best reception.

Using Bluetooth & USB

Stream audio wirelessly or charge devices.

Bluetooth pairing: Press BLUETOOTH button until "PAIRING" flashes.
On device, enable Bluetooth and select "XDR-S10HDIP".
Once connected, audio streams automatically.
USB charging: Connect device cable to USB port; charging icon appears.
Disconnect Bluetooth: Hold BLUETOOTH button for 3 seconds.

WARNING! Do not connect incompatible devices to USB port. Maximum 1A output.

Presets & Memory

Store up to 6 favorite stations.

Tune to desired station (AM/FM/HD).
Press and hold preset button (1-6) until beep confirms.
Recall: Press preset button briefly.
Clear preset: Hold preset button while on different station.

Clock and alarm settings retained during battery change (brief backup).

Care & Cleaning

Unplug and remove batteries before cleaning. Wipe with slightly damp cloth; dry thoroughly.

CAUTION! Do not submerge in water. Avoid harsh chemicals. Keep ports dry.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. ICES-003: Complies with Canadian standards. Bluetooth SIG qualified. Copyright © Sony Corporation. For support, visit www.sony.com/audio or contact 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Batteries/adapter	Check battery polarity; ensure adapter plugged in securely.
Poor radio reception	Antenna/location	Extend antenna fully; reposition radio; avoid obstructions.
Bluetooth not connecting	Pairing mode/distance	Enter pairing mode; ensure within 33 feet; remove obstacles.
No sound from AUX	Cable/mode selection	Check cable connections; press MODE to select "AUX".
USB not charging	Device/cable	Try different cable; ensure device is charging-compatible.

Reset: Menu > System > Factory Reset to restore defaults.

Service: 1-800-222-7669; www.sony.com/audio