Sony WALKMAN SRF-M807 Radio User Manual

The Sony WALKMAN SRF-M807 is a portable AM/FM stereo radio with digital tuning, 20 station presets (10 FM, 10 AM), auto-scan tuning, LCD display with backlight, built-in speaker, stereo headphone jack, belt clip, and battery power indicator. Powered by 2 AAA batteries. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using Radio Functions 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: LCD display, Speaker, Headphone jack, Belt clip, Battery compartment, Control buttons.

FeatureDescription
LCD displayShows frequency, station preset, battery status, time
Built-in speakerFor listening without headphones
Stereo headphone jackFor private listening with stereo headphones
Belt clipAttaches to belt or bag for portable use
Battery compartmentHolds 2 AAA batteries
POWER/HOLD switchTurns radio on/off; locks buttons to prevent accidental operation
TUNING buttonsManual tuning up/down
AUTO SCAN buttonAutomatically scans and stops at next strong station
PRESET buttonsSelects stored station presets (1-10)
BAND buttonSwitches between FM and AM bands

Installation

Unpack and inspect contents. Ensure all parts are present.

  1. Insert batteries: Open battery compartment, insert 2 AAA batteries observing correct polarity.
  2. Attach belt clip: Slide clip onto back of radio until it clicks into place.
  3. Connect headphones: Plug stereo headphones into headphone jack for private listening.
  4. Extend antenna: Fully extend telescopic antenna for best FM reception.

WARNING! Do not mix old and new batteries or different battery types. Remove batteries if not using for extended period.

First-Time Setup

Power on radio; follow these steps for initial use.

  1. Set time: Press and hold DISPLAY button to enter time set mode, use TUNING buttons to adjust.
  2. Auto-scan stations: Press AUTO SCAN to automatically find and store strong stations.
  3. Manual station storage: Tune to desired station, press and hold PRESET button (1-10) for 2 seconds.
  4. Adjust volume: Use VOLUME buttons to set comfortable listening level.

CAUTION! Keep away from water and extreme temperatures. Do not disassemble.

Specifications

Controls and Settings

Access functions via front panel buttons. POWER/HOLD: Slide to ON position, then to HOLD to lock controls.

Display Indicators: FM/AM band, frequency, preset number, battery level, time.

Tuning: Manual (TUNING buttons) or automatic (AUTO SCAN). Presets: Store by tuning to station, then press and hold PRESET button. Volume: Adjust with VOLUME buttons. Display: Press DISPLAY to toggle between frequency and time. Backlight: Press any button to illuminate display (if equipped).

Connecting Devices

Headphones: Standard 3.5mm stereo jack. External antenna: Not supported.

  1. Turn radio off before connecting headphones.
  2. Insert headphone plug fully into jack.
  3. Adjust volume to low level before placing headphones on ears.

Tip: Use headphones for stereo FM reception. Speaker provides monaural sound only.

Using Radio Functions

Supports FM stereo and AM reception.

  1. Power on: Slide POWER/HOLD switch to ON position.
  2. Select band: Press BAND to choose FM or AM.
  3. Tune station: Use TUNING buttons or AUTO SCAN to find station.
  4. Store preset: Tune to station, press and hold desired PRESET button (1-10).
  5. Recall preset: Press corresponding PRESET button.
  6. Adjust volume: Use VOLUME buttons.
  7. Use HOLD function: Slide to HOLD to prevent accidental button presses.
  8. Check battery: Low battery icon appears when batteries need replacement.

WARNING! Do not listen at high volume for extended periods to prevent hearing damage.

Accessibility Features

Large buttons: Easy to press for users with limited dexterity. Tactile markings: Raised dots on frequently used buttons. Display backlight: Illuminates in low light conditions.

Care & Cleaning

Remove batteries before cleaning. Use soft, dry cloth only; do not use solvents or abrasive cleaners.

CAUTION! Keep away from moisture. Do not expose to direct sunlight for extended periods.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Sony Corporation. For support, visit www.sony.com/electronics/support or contact Sony Customer Service at 1-800-222-7669.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerDead batteries/HOLD switchReplace batteries; ensure POWER/HOLD switch is in ON position.
Poor FM receptionAntenna position/locationFully extend antenna; reposition radio; move away from obstructions.
No sound from speakerHeadphone plugged in/volumeRemove headphones; increase volume; check HOLD switch.
Presets not storedIncorrect procedurePress and hold PRESET button for 2 seconds until beep sounds.
Display dim or blankLow batteriesReplace batteries; press any button to activate backlight.
AM interferenceElectrical sourcesMove away from computers, fluorescent lights, or other electronic devices.

Reset: Remove batteries for 30 seconds, then reinsert to reset microprocessor.

Service: 1-800-222-7669; www.sony.com/electronics/support

Sony WALKMAN SRF-M807 Radio User Manual © - All Rights Reserved 2025