Sony TR-1000 Radio User Manual

The Sony TR-1000 is a portable AM/FM radio with digital tuning, built-in speaker, headphone jack, LCD display with backlight, telescopic antenna, battery operation (2x AA), and AC adapter compatibility. Features include preset stations, auto-scan tuning, sleep timer, and alarm function. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: LCD display with backlight, telescopic antenna, speaker, headphone jack, control buttons, battery compartment.

Installation

Unpack and inspect contents. Place on stable surface.

1. Install batteries: Open battery compartment, insert 2 AA batteries observing polarity.
2. Extend antenna: Pull telescopic antenna fully for best reception.
3. Connect AC adapter: Plug into DC input jack and wall outlet (optional).
4. Connect headphones: Insert into 3.5mm jack for private listening.

WARNING! Use correct battery polarity to avoid damage. Do not mix old and new batteries.

First-Time Setup

Power on radio; follow initial setup.

1. Set time: Press and hold CLOCK button, use TUNING to set time.
2. Auto-scan stations: Press and hold SCAN button to automatically find and store stations.
3. Save presets: Tune to desired station, press and hold PRESET button (1-5) for 2 seconds.
4. Adjust volume: Use VOLUME buttons to set listening level.

CAUTION! Keep away from moisture and extreme temperatures.

Specifications

• Bands: AM (530-1710 kHz), FM (87.5-108 MHz).
• Tuning: Digital PLL synthesized.
• Presets: 5 stations per band (AM/FM).
• Audio Output: Built-in speaker (8Ω, 0.5W), headphone jack.
• Power Source: 2x AA batteries or DC 3V adapter.
• Display: LCD with backlight (time/frequency).
• Antenna: Telescopic for FM, internal ferrite for AM.
• Dimensions: Approx. 120mm x 70mm x 30mm.
• Weight: Approx. 200g (without batteries).

Controls and Settings

Front panel: POWER, BAND, VOLUME, TUNING, PRESET 1-5. Top panel: SCAN, CLOCK, SLEEP, ALARM.

Display indicators: AM/FM band, frequency, preset number, time, alarm icon, battery level.

Tuning: Manual (TUNING buttons) or auto (SCAN). Presets: Store 5 stations per band. Clock: Set time with CLOCK button. Sleep timer: Set 15-90 minutes in SLEEP menu. Alarm: Set wake-up to radio or buzzer in ALARM menu. Backlight: Press LIGHT button to illuminate display.

Connecting Devices

Headphones: 3.5mm jack. AC adapter: DC 3V input.

1. Turn off radio before connecting devices.
2. Insert headphones fully into jack.
3. Use Sony AC-3030 adapter or equivalent (3V DC, center positive).

Tip: Use AC adapter for extended listening to save batteries.

Using Radio Functions

Supports AM/FM reception with preset memory.

1. Power on: Press POWER button.
2. Select band: Press BAND to switch AM/FM.
3. Tune station: Use TUNING buttons or SCAN for auto-search.
4. Save preset: Tune station, hold PRESET button (1-5) until beep.
5. Recall preset: Press corresponding PRESET button.
6. Set sleep timer: Press SLEEP, select duration (15,30,60,90 min).
7. Set alarm: Hold ALARM, set time with TUNING, select radio/buzzer.
8. Adjust volume: Use VOLUME +/- buttons.

WARNING! Do not expose to strong magnetic fields. Adjust antenna for best reception.

Accessibility Features

Backlight: Press LIGHT for display illumination in dark. Large buttons: Easy operation for all users. Headphone jack: Private listening option.

Care & Cleaning

Remove batteries before cleaning. Use soft, dry cloth; avoid liquids.

CAUTION! Do not use abrasive cleaners. Keep antenna fully extended when not in use.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. Copyright © Sony Corporation. For support, visit www.sony.com/electronics/support or contact 1-800-222-7669.

Troubleshooting

Reset: Remove batteries for 5 minutes to reset all settings.

Service: 1-800-222-7669; www.sony.com/electronics/support