Sony SRF-M95 Walkman Radio User Manual

The Sony SRF-M95 is a portable AM/FM stereo radio Walkman featuring a built-in speaker, stereo headphones, digital tuning with preset stations, auto-scan, bass boost, LCD display with backlight, telescopic antenna, and operates on two AA batteries. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Headphones/Speaker 7. Using Radio Functions 8. Battery Information 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable radio unit with LCD display, built-in speaker, telescopic antenna, headphone jack, control buttons, battery compartment.

Feature	Description
AM/FM Stereo Tuner	Digital tuning with 20 station presets (10 AM, 10 FM)
Built-in Speaker	For listening without headphones
Stereo Headphone Jack	3.5mm jack for private listening
LCD Display	Shows frequency, preset number, battery status, time
Telescopic Antenna	Extends for improved FM reception
Bass Boost	Enhances low-frequency sound
Auto-Scan	Automatically finds and stops at stations
Sleep Timer	Turns radio off after set time
Power Source	Two AA batteries or optional AC adapter
Carrying Strap	Attached for portability

Installation

Unpack and inspect contents. Ensure all parts are present.

Insert batteries: Open battery compartment, insert two AA batteries observing polarity.
Extend antenna: Pull telescopic antenna fully for FM reception.
Connect headphones: Plug into 3.5mm jack if desired.
Power on: Slide POWER switch to ON position.

WARNING! Do not expose to water or extreme temperatures. Keep batteries away from children.

First-Time Setup

Power on radio; follow initial setup steps.

Set time: Press CLOCK button, use TUNING buttons to set time, press CLOCK again.
Select band: Press BAND to choose AM or FM.
Auto-tune stations: Press and hold SCAN to automatically scan and store strong stations.
Save presets: Tune to desired station, press and hold a number (1-10) for 2 seconds.
Adjust volume: Use VOLUME buttons.

CAUTION! Use only recommended battery type. Remove batteries if not used for extended periods.

Specifications

Tuning Range: FM 87.5-108 MHz, AM 530-1710 kHz.
Preset Memory: 20 stations (10 FM, 10 AM).
Speaker: Built-in dynamic speaker.
Output: Headphone jack (3.5mm stereo).
Display: LCD with backlight.
Antenna: Telescopic rod for FM, internal ferrite bar for AM.
Power Supply: 2 x AA batteries (DC 3V) or DC 3V AC adapter.
Battery Life: Approx. 50 hours (alkaline, volume mid-level).
Dimensions: Approx. 120 x 75 x 30 mm.
Weight: Approx. 180g (without batteries).

Controls and Settings

Front Panel: POWER switch, VOLUME +/-, BAND, SCAN, CLOCK, PRESET buttons 1-10.

Side Controls: Bass Boost switch, Headphone jack, DC IN jack.

Tuning: Manual tuning with TUNING +/- buttons. Presets: Press number to recall preset station. Display: Shows frequency, band, preset number, battery icon, clock. Audio: Bass Boost enhances low frequencies. Sleep Timer: Press SLEEP to set auto power-off (15-90 minutes).

Connecting Headphones/Speaker

Built-in speaker: No connection needed. Headphones: Use 3.5mm stereo plug. External power: Use optional AC adapter (DC 3V, center positive).

Ensure radio is off before connecting headphones.
Plug headphones fully into jack.
For AC adapter, insert plug into DC IN jack.

Tip: Disconnect headphones to use built-in speaker automatically.

Using Radio Functions

Basic operation for AM/FM listening.

Power on: Slide POWER to ON.
Select band: Press BAND for FM or AM.
Tune: Use TUNING +/- or SCAN for auto-scan.
Recall preset: Press numbered button (1-10).
Adjust volume: VOLUME +/- buttons.
Bass Boost: Slide switch to ON for enhanced bass.
Sleep Timer: Press SLEEP repeatedly to set duration.
Clock: Press CLOCK to view time; hold to set.

WARNING! Do not use headphones at high volume for extended periods to prevent hearing damage.

Battery Information

Use two AA batteries (alkaline recommended). Battery indicator on LCD shows status.

Low battery: Indicator blinks; replace soon. Battery replacement: Power off, open compartment, replace both batteries. AC adapter: Use Sony AC-304 or equivalent (3V DC, 500mA).

Care & Cleaning

Remove batteries before cleaning. Wipe exterior with soft, dry cloth. Do not use solvents.

CAUTION! Avoid water and liquids. Keep antenna fully extended when not in use to prevent damage.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. This device complies with part 15 of the FCC Rules. Copyright © Sony Corporation. For support, visit www.sony.com/electronics/support or contact 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Batteries dead/incorrect	Replace batteries; check polarity.
Poor FM reception	Antenna not extended	Extend telescopic antenna fully; reposition radio.
No sound from speaker	Headphones plugged in	Unplug headphones; check volume level.
Presets lost	Batteries removed	Replace batteries within 5 minutes to retain memory.
Display dim/no backlight	Low battery	Replace batteries; ensure backlight is enabled.
Auto-scan not stopping	Weak signal	Manual tune; improve antenna position.

Reset: Remove batteries for 5 minutes to reset microcomputer.

Service: 1-800-222-7669; www.sony.com/electronics/support