Sony SRF-FQ9 Radio User Manual

The Sony SRF-FQ9 is a portable digital FM/AM radio featuring a large, easy-to-read LCD display, 30 station presets (20 FM, 10 AM), auto-scan tuning, digital tuning with manual fine adjustment, built-in speaker with adjustable volume, headphone jack for private listening, battery level indicator, sleep timer, and alarm function. Powered by 2 AA batteries or optional AC adapter. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using Advanced Functions 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Large LCD Display, Speaker, Headphone Jack, Tuning/Volume Knob, Preset Buttons, Power/Band Button, Function Buttons (Sleep, Alarm, Scan).

FeatureDescription
LCD DisplayShows frequency, time, battery level, band, and preset number
SpeakerBuilt-in for room-filling sound
Headphone Jack (3.5mm)For private audio listening
Tuning KnobFor manual frequency adjustment
Volume KnobAdjusts sound output level
Preset Buttons (1-10)Store and recall up to 30 favorite stations
Power/Band ButtonTurns radio on/off and switches between FM/AM bands
Auto-Scan ButtonAutomatically finds and stops at the next strong station
Sleep Timer ButtonSets radio to turn off automatically after 15-90 minutes
Alarm ButtonSets alarm to wake to radio or buzzer

Installation

Unpack and inspect contents. Place on stable, flat surface.

  1. Insert Batteries: Open battery compartment on back, insert 2 AA batteries observing correct polarity (+/-).
  2. Connect AC Adapter (Optional): Plug DC output into DC IN jack on side; plug adapter into AC outlet.
  3. Extend Antenna: Fully extend telescopic antenna for best FM reception. For AM, rotate radio for optimal signal.
  4. Connect Headphones: Plug 3.5mm headphones into headphone jack for private listening.

WARNING! Use only recommended battery type. Do not mix old and new batteries. Remove batteries if not using for extended period.

First-Time Setup

Power on radio; follow initial setup steps.

  1. Set Time: Hold CLOCK button, use Tuning knob to adjust hour/minute, press CLOCK to confirm.
  2. Select Band: Press POWER/BAND button to toggle between FM and AM.
  3. Tune Stations: Use Tuning knob manually or press AUTO SCAN to find stations automatically.
  4. Save Presets: Tune to desired station, hold a Preset button (1-10) for 2 seconds until beep confirms.
  5. Adjust Volume: Turn Volume knob to comfortable listening level.

CAUTION! Keep away from moisture and extreme temperatures. Place on stable surface to prevent falls.

Specifications

Controls and Settings

Access functions via front panel buttons and knobs.

Front Panel: POWER/BAND, TUNING, VOLUME, PRESET 1-10, AUTO SCAN, SLEEP, ALARM, CLOCK.

Tuning: Manual (Tuning knob) or Auto (AUTO SCAN button). Volume: Adjust via Volume knob; turn fully counterclockwise for mute. Presets: Press number to recall; hold to store. Sleep Timer: Press SLEEP repeatedly to set 15, 30, 45, 60, 90 min; display shows countdown. Alarm: Press ALARM to set wake time and source (radio or buzzer); alarm icon appears when active. Clock: Hold CLOCK to set time.

Connecting Devices

Headphones: 3.5mm jack. AC Adapter: DC IN jack.

  1. Ensure radio is off before connecting devices.
  2. Plug headphones fully into headphone jack.
  3. For AC adapter, connect DC plug to DC IN jack, then plug adapter into wall outlet.
  4. When using AC power, battery power is automatically disconnected.

Tip: Use headphones for private listening or to improve reception by using headphone cord as FM antenna.

Using Advanced Functions

Supports sleep timer, alarm, and battery saver mode.

  1. Sleep Timer: Press SLEEP to select duration (15-90 min); radio turns off automatically. Cancel by pressing SLEEP until display shows "OFF".
  2. Alarm: Press ALARM to enter alarm set mode; use Tuning knob to set hour/minute. Press ALARM again to select source (radio or buzzer). Alarm icon blinks when set. To disable, press and hold ALARM for 2 seconds.
  3. Battery Saver: In FM mode, if no station is tuned for 15 minutes, radio automatically powers off to conserve batteries.
  4. Manual Fine Tuning: In FM mode, after auto-scan, use Tuning knob for slight adjustments to improve reception.

WARNING! Do not expose to direct sunlight or heat sources. Keep battery compartment securely closed.

Accessibility Features

Large, backlit display for easy reading in low light. Tactile buttons with distinct shapes. Clear audio prompts for key actions (beep for preset save).

Care & Cleaning

Remove batteries before cleaning. Use soft, dry cloth only; do not use liquids or abrasive cleaners.

CAUTION! Do not immerse in water. Keep away from dust and magnetic fields.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Sony Corporation. For support, visit www.sony.com/electronics/support or contact Sony Customer Service at 1-800-222-7669.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerDead batteries, incorrect polarityReplace batteries; ensure correct +/- orientation.
Poor FM receptionAntenna not extended, locationFully extend antenna; move radio near window; use headphones as antenna.
Poor AM receptionInterference, orientationRotate radio; move away from electronics (computers, TVs).
No sound from speakerVolume low, headphones plugged inIncrease volume; unplug headphones.
Presets not savingBatteries very low, incorrect procedureReplace batteries; hold preset button until beep sounds.
Display dim or blankBattery saver mode, low batteriesPress any button to wake; replace batteries.

Reset: Remove batteries for 1 minute, then reinsert to reset all settings to factory default.

Service: 1-800-222-7669; www.sony.com/electronics/support

Sony SRF-FQ9 Radio User Manual © - All Rights Reserved 2025