Sony SHR-M1 Radio User Manual

The Sony SHR-M1 is a compact AM/FM digital radio with advanced tuning capabilities, preset memory stations, digital display, built-in speaker, headphone jack, and alarm/clock functions. Powered by AC adapter or batteries for portability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using Preset Stations 8. Alarm & Clock Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital tuner with LCD display, built-in speaker, headphone jack, telescopic antenna, power input, and control buttons.

Feature	Description
AM/FM Tuner	Digital tuning with auto/manual seek
LCD Display	Shows frequency, time, station info
Preset Memory	Stores up to 20 stations (10 AM, 10 FM)
Headphone Jack	3.5mm output for private listening
Telescopic Antenna	Extendable for improved FM reception
AC Input	For power connection (adapter included)
Battery Compartment	Holds 4 AA batteries for portable use
ALARM/SLEEP	Sets alarm and sleep timer functions
PRESET/TUNING	Selects preset stations or manual tuning
POWER	Turns radio on/off

Installation

Unpack and inspect contents. Place on stable, flat surface.

Extend telescopic antenna fully for best FM reception.
Connect AC adapter: Plug into DC IN jack and wall outlet.
Insert batteries: Open compartment, install 4 AA batteries (for backup/portable use).
Connect headphones: Plug into 3.5mm jack if desired.

WARNING! Use only Sony-approved AC adapter. Do not expose to moisture.

First-Time Setup

Power on radio; follow initial setup prompts.

Set time: Hold CLOCK button, use TUNING to set hour/minute.
Tune stations: Press BAND to select AM/FM, use TUNING to find station.
Save presets: Tune to station, hold PRESET, select memory number (1-20).
Adjust volume: Use VOLUME knob or buttons.

CAUTION! Keep away from heat sources and magnetic fields.

Specifications

Tuner Range: FM 87.5-108 MHz, AM 530-1710 kHz.
Power Supply: AC 120V 60Hz (adapter) or 4x AA batteries.
Output: Built-in speaker (1W), 3.5mm headphone jack.
Display: LCD with backlight.
Presets: 20 total (10 AM, 10 FM).
Functions: Alarm, sleep timer (15-90 min), clock.
Dimensions: Compact portable design.
Operating Temp: 32°F to 104°F (0°C to 40°C).

Controls and Settings

Front Panel: POWER, VOLUME, BAND, TUNING, PRESET, CLOCK, ALARM/SLEEP.

Display Indicators: AM/FM, frequency, time, preset number, alarm icon.

Tuning: Auto-seek (hold TUNING) or manual step tuning. Volume: Adjust via knob or +/- buttons. Clock: Set via CLOCK button. Alarm: Set alarm time and source (radio/buzzer). Sleep: Timer turns radio off after set period.

Connecting Devices

Headphones: Standard 3.5mm plug. External antenna: Optional FM antenna connector for weak signal areas.

Ensure radio is off before connecting devices.
Plug headphones into jack for private listening.
For external antenna, connect to FM ANT terminal if available.

Tip: Use quality headphones for best audio experience.

Using Preset Stations

Store and recall favorite stations quickly.

Tune to desired station using BAND and TUNING.
Press and hold PRESET button until display flashes.
Select memory number (1-20) using TUNING or numeric keys.
Press PRESET again to save.
Recall: Press PRESET briefly, then select number.
Scan presets: Hold PRESET and use TUNING to cycle through saved stations.

Note: Presets are retained during power loss if batteries installed.

Alarm & Clock Functions

Set daily alarm with radio or buzzer tone.

Set current time: Hold CLOCK, adjust with TUNING.
Set alarm: Hold ALARM, set time, select source (RADIO/BUZZER).
Enable/disable: Press ALARM to toggle on/off (icon shows).
Snooze: Press any button during alarm for 9-minute delay.
Sleep timer: Press SLEEP repeatedly to set 15-90 minute duration.

Tip: Alarm requires AC power or fresh batteries.

Care & Cleaning

Unplug adapter and remove batteries before cleaning. Use soft, dry cloth only.

CAUTION! Do not use solvents or water. Keep controls dry.

Regulatory Information

FCC Part 15: Class B digital device compliant. This device complies with part 15 of FCC Rules. Copyright © Sony Corporation. For support, visit www.sony.com/audio or contact Sony Customer Service at 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Adapter/batteries	Check AC connection; replace batteries; ensure POWER is on.
Poor reception	Antenna/location	Extend antenna fully; reposition radio; avoid obstructions.
No sound	Volume/mute	Increase volume; check headphone plug (removes speaker).
Display dim/blank	Power/backlight	Check batteries; press any button to activate backlight.
Presets lost	Battery failure	Replace batteries; presets require battery backup.
Alarm not working	Settings/power	Ensure alarm enabled; check time setting; AC power required.

Reset: Remove batteries and AC adapter for 5 minutes to reset microprocessor.

Service: 1-800-222-7669; www.sony.com/audio