Sony ISF-B01 Radio User Manual

The Sony ISF-B01 is a versatile digital radio featuring AM/FM tuner with 30 station presets, Bluetooth connectivity for wireless audio streaming, auxiliary input for external devices, built-in speaker with enhanced bass, digital display with backlight, alarm clock with snooze function, sleep timer, and headphone jack for private listening. Powered by AC adapter or optional battery backup. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using Bluetooth 8. Alarm Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital AM/FM tuner, Bluetooth receiver, Auxiliary input, Digital display, Built-in speaker, Headphone jack, Alarm clock.

FeatureDescription
AM/FM TunerDigital tuning with 30 station presets (15 AM, 15 FM)
BluetoothWireless audio streaming from compatible devices
Auxiliary Input3.5mm jack for connecting external audio sources
Digital DisplayBacklit LCD showing time, station, and mode
Built-in SpeakerFull-range speaker with bass enhancement
Headphone Jack3.5mm output for private listening
Alarm ClockDual alarm with radio or buzzer option
Sleep TimerAuto shut-off from 15 to 90 minutes
Power SourceAC adapter (included) or optional battery backup
Snooze Function9-minute snooze with repeat capability

Installation

Unpack and inspect contents. Place on stable, flat surface.

  1. Connect power: Plug AC adapter into DC IN jack and wall outlet.
  2. Extend antenna: Fully extend telescopic antenna for best reception.
  3. Connect external devices: Use AUX IN for MP3 players, phones, etc.
  4. For battery backup: Install 3 AA batteries (not included) in compartment.

WARNING! Use only Sony-approved AC adapter. Keep away from water and heat sources.

First-Time Setup

Plug in power; radio turns on to standby mode.

  1. Set time: Press and hold CLOCK SET, use TUNING buttons to adjust.
  2. Auto-scan stations: Press BAND to select AM/FM, hold TUNING for 2 seconds.
  3. Save presets: Tune to station, press and hold preset number (1-30).
  4. Adjust display: Use DIMMER button to set backlight brightness.
  5. Pair Bluetooth: Enter pairing mode (see section 7).

CAUTION! Ensure proper ventilation; do not block speaker grille.

Specifications

Controls and Settings

Front Panel: POWER, BAND, TUNING, PRESET, VOLUME, MENU, ALARM SET, SNOOZE.

Remote: POWER, NUMERIC (0-9), VOLUME, MUTE, BAND, PRESET, MENU, PLAY/PAUSE (Bluetooth).

Tuner: Auto/manual tuning, preset memory (30 stations). Audio: Bass boost on/off, volume control. Display: Time format (12/24 hr), backlight level. Alarm: Set time, source (radio/buzzer), volume. Bluetooth: Pairing mode, device list. System: Reset to factory defaults.

Connecting Devices

AUX: 3.5mm cable from external device to AUX IN. Bluetooth: Wireless pairing.

  1. Turn on radio and external device.
  2. For AUX: Connect cable, press MODE to select AUX.
  3. For Bluetooth: Enter pairing mode (see below).
  4. Adjust volume on both devices.

Tip: Use high-quality audio cables for best AUX connection.

Using Bluetooth

Stream audio from smartphones, tablets, or computers.

  1. Enable Bluetooth on your device.
  2. On radio: Press and hold MODE until "PAIRING" appears.
  3. Select "SONY ISF-B01" from device list.
  4. Enter PIN "0000" if prompted.
  5. Play audio: Control playback via device or remote PLAY/PAUSE.
  6. Disconnect: Turn off Bluetooth on device or press MODE to switch source.

WARNING! Keep within 10m range. Interference may occur near microwaves or routers.

Alarm Functions

Set dual alarms to wake to radio or buzzer.

  1. Set alarm time: Press ALARM SET, choose ALARM 1 or 2, set time with TUNING.
  2. Choose source: Radio (last station) or Buzzer.
  3. Set volume: For radio alarm, adjust alarm volume separately.
  4. Enable/disable: Toggle alarm ON/OFF in menu.
  5. Snooze: Press SNOOZE during alarm for 9-minute delay.

Note: Alarm works in standby mode. Ensure power is connected.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth. For stubborn stains, dampen cloth with water only.

CAUTION! Do not use solvents or abrasive cleaners. Never immerse in water.

Regulatory Information

FCC Part 15: Class B digital device compliant. Bluetooth SIG qualified. Copyright © Sony Corporation. For support, visit www.sony.com/audio or contact Sony Customer Service at 1-800-222-7669.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower connectionCheck AC adapter connection; try different outlet.
Poor FM receptionAntenna positionExtend antenna fully; reposition radio.
Bluetooth not pairingDistance/interferenceMove devices closer; ensure pairing mode active.
No sound from AUXCable/input selectionCheck cable connections; press MODE to select AUX.
Alarm not soundingSettings/powerVerify alarm is ON and set correctly; ensure power connected.
Display dim or blankBacklight settingPress DIMMER to adjust brightness; check power.

Reset: Press and hold MENU and POWER for 5 seconds to factory reset.

Service: 1-800-222-7669; www.sony.com/audio

Sony ISF-B01 Radio User Manual © - All Rights Reserved 2025