Sony ICF-C560 Radio User Manual

The Sony ICF-C560 is a compact AM/FM digital clock radio featuring a large, easy-to-read LCD display, dual alarm functions with adjustable wake-up volume, snooze function, battery backup for time and alarm memory, sleep timer, and a built-in speaker. It operates on AC power with optional battery backup. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using the Alarm & Timer 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with LCD display, built-in speaker, control buttons, AC power cord, and optional battery compartment.

Feature	Description
LCD Display	Shows time, alarm settings, radio frequency, and mode indicators
AM/FM Tuner	Digital tuning for AM and FM radio bands
Dual Alarms	Set two independent wake-up times (ALARM 1 & ALARM 2)
Snooze Function	Temporarily pauses alarm for extra sleep (typically 9 minutes)
Sleep Timer	Automatically turns off the radio after a set period
Battery Backup	Maintains time and alarm settings during power outages (requires batteries)
Wake to Radio/Buzzer	Choice of waking to radio station or alarm buzzer tone
Volume Control	Separate controls for radio and alarm volume
Time Set	Buttons for setting the current hour and minute
Power Source	AC 120V, 60Hz with DC battery backup option

Installation

Unpack and inspect contents. Place on a stable, flat surface near a power outlet.

Connect Power: Plug the AC power cord into a standard 120V wall outlet.
Install Backup Batteries (Optional): Open the battery compartment on the bottom and insert batteries (e.g., 2 x AA) to maintain settings during power loss.
Extend the Telescopic Antenna: Fully extend the antenna for better FM reception. For AM, orient the entire unit for best signal.
Positioning: Place the radio away from large metal objects, computers, or other electronics that may cause interference.

WARNING! Use only the provided AC adapter. Do not place near heat sources or in direct sunlight.

First-Time Setup

Plug in the radio; the display will light up. Follow these steps to configure initial settings.

Set the Time: Press and hold the TIME SET button. Use the HOUR and MINUTE buttons to set the correct time. Release TIME SET when done.
Set the Alarm: Press the ALARM 1 or ALARM 2 button. Use the HOUR and MINUTE buttons to set the desired wake-up time. Press the ALARM button again to confirm.
Select Wake-up Sound: For each alarm, press the RADIO/BUZZER button to choose between waking to the radio or the buzzer tone.
Tune Radio Stations: Press the BAND button to select AM or FM. Use the TUNING UP/DOWN buttons to find a station. For FM, ensure the antenna is fully extended.

CAUTION! Ensure the radio is on a stable surface. Keep the power cord untangled and away from foot traffic.

Specifications

Model: Sony ICF-C560.
Tuning Range: FM 87.5 - 108 MHz, AM 530 - 1710 kHz.
Power Supply: AC 120V, 60Hz.
Backup Power: 2 x AA batteries (not included).
Display: Digital LCD with backlight.
Alarms: Dual independent alarms with adjustable volume.
Snooze: Approximately 9-minute duration.
Sleep Timer: 15 to 90 minutes in 15-minute increments.
Speaker: Built-in mono speaker.
Dimensions: Compact desktop design.
Operating Temp: 5°C to 35°C (41°F to 95°F).

Controls and Settings

Access functions via front panel buttons. Display shows active modes.

Front Panel: POWER, BAND (AM/FM), TUNING UP/DOWN, ALARM 1, ALARM 2, SNOOZE, SLEEP, TIME SET, HOUR, MINUTE, RADIO/BUZZER, VOLUME UP/DOWN.

Basic Operation: Press POWER to turn radio on/off. Use BAND to switch between AM and FM. Use TUNING buttons to find stations. Adjust volume with VOLUME buttons.

Display Indicators: Shows current time, alarm set times, AM/FM band, alarm on/off icons, and sleep timer status.

Connecting Devices

This is a standalone clock radio with no external audio input jacks. For best performance:

Ensure the AC power cord is securely plugged in.
For battery backup, ensure batteries are correctly installed with proper polarity (+/-).
Fully extend the FM telescopic antenna and adjust its angle for best reception.

Tip: For AM reception, rotating the entire radio may improve signal strength.

Using the Alarm & Timer

Manage wake-up and sleep functions.

Setting an Alarm: Press ALARM 1 or ALARM 2. Use HOUR/MINUTE to set time. Press RADIO/BUZZER to choose sound source. The alarm icon will appear on display when active.
Snooze: When alarm sounds, press SNOOZE to silence it for about 9 minutes. It will repeat until turned off.
Turning Off Alarm: Press the POWER button or the corresponding ALARM button (1 or 2) to stop the alarm for that day.
Sleep Timer: Press SLEEP repeatedly to set duration (15, 30, 45, 60, 75, 90 min). The radio will play and then turn off automatically. The sleep timer indicator will show.
Deactivating Alarm: Press and hold the corresponding ALARM button until the alarm icon disappears from the display.

WARNING! Do not rely solely on battery backup for primary alarm function; use AC power when possible.

Accessibility Features

Large, high-contrast LCD display for easy time reading. Adjustable alarm volume to suit user preference. Buzzer alarm option for those who prefer a tone over the radio.

Care & Cleaning

Unplug from the AC outlet before cleaning. Use a soft, dry cloth to wipe the cabinet and display. Do not use chemical cleaners or aerosols.

CAUTION! Never allow liquid to enter the unit through vents or buttons. Do not submerge any part of the radio.

Regulatory Information

FCC Part 15 Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © Sony Corporation. For support, visit www.sony.com/electronics/support or contact Sony customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power / Display blank	Power cord not connected	Ensure AC plug is firmly in wall outlet and radio.
Time/alarm resets	Dead backup batteries or power outage	Replace backup batteries (2 x AA).
Poor FM reception	Antenna not extended or positioned poorly	Fully extend telescopic antenna and adjust its position.
Poor AM reception	Interference or location	Move radio away from electronics; reorient the unit.
Alarm does not sound	Alarm not activated or volume too low	Check that alarm icon is on display. Increase alarm volume.
Radio has static/no sound	Volume too low or mute on	Increase volume. Ensure radio is not in sleep timer countdown mode.

Reset: Unplug the unit and remove backup batteries for 1 minute to reset microprocessor. Reconnect power and reset time/alarms.

Service: For service, contact Sony Customer Support or visit www.sony.com/support.