Sony ICF-303 Radio User Manual

The Sony ICF-303 is a portable AM/FM radio with a built-in speaker, telescopic antenna, headphone jack, and battery operation. It features manual tuning, volume control, and a compact, durable design for personal listening at home or on the go. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: AM/FM tuner, built-in speaker, telescopic antenna, headphone jack, battery compartment, and control knobs.

Installation

Unpack and inspect contents. Place on stable surface or hold securely.

1. Install batteries: Open battery compartment, insert batteries observing correct polarity (+/-).
2. Extend antenna: For FM listening, fully extend the telescopic antenna.
3. Connect headphones (optional): Plug into headphone jack for private listening.
4. Connect AC adapter (optional): Plug adapter into DC input jack and wall outlet.

WARNING! Use correct battery type; do not mix old and new batteries. Ensure proper polarity to avoid damage.

First-Time Setup

Power on radio; follow these steps.

1. Select band: Set BAND switch to AM or FM.
2. Tune to station: Turn TUNING knob slowly to find desired station.
3. Adjust volume: Turn VOLUME knob to comfortable listening level.
4. For best reception: Adjust radio position and antenna orientation.

CAUTION! Keep away from moisture and extreme temperatures.

Specifications

• Model: Sony ICF-303.
• Bands: AM (530–1710 kHz), FM (88–108 MHz).
• Speaker: Built-in dynamic speaker.
• Power Source: 2 x AA batteries (UM-3) or optional AC adapter.
• Headphone Output: 3.5mm stereo jack.
• Antenna: Telescopic for FM; built-in ferrite rod for AM.
• Dimensions: Compact portable size.
• Weight: Lightweight for easy carrying.

Controls and Settings

All controls are manual. Front/Side Panel: POWER switch, BAND switch, TUNING knob, VOLUME knob.

Operation: Turn POWER to ON, select BAND, tune with TUNING knob, adjust VOLUME. No remote control included.

Reception: Adjust telescopic antenna length and direction for FM. For AM, rotate radio for best signal.

Connecting Devices

Headphones: 3.5mm plug into headphone jack. AC Adapter: Use Sony recommended adapter (DC 3V).

1. Turn off radio before connecting devices.
2. Plug headphones fully into jack.
3. For AC adapter, ensure voltage matches specification.

Tip: Use headphones to listen privately without disturbing others.

Using the Radio

Supports AM and FM band reception.

1. Power on: Set POWER switch to ON.
2. Select band: Choose AM or FM with BAND switch.
3. Tune: Slowly turn TUNING knob until station is clear.
4. Adjust volume: Set desired level with VOLUME knob.
5. Improve reception: For FM, extend and orient telescopic antenna. For AM, move radio location.
6. Power off: Set POWER switch to OFF when not in use.

WARNING! Do not force knobs; turn gently. Avoid exposing to water.

Accessibility Features

Large, tactile knobs for easy operation. Headphone jack for private listening. Simple controls suitable for all users.

Care & Cleaning

Remove batteries before cleaning. Use soft, dry cloth; do not use liquids or abrasive cleaners.

CAUTION! Do not immerse in water; keep battery compartment dry.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Sony Corporation; trademarks owned by Sony. For support, visit www.sony.com/electronics/support or contact Sony customer service.

Troubleshooting

Reset: Turn power off and on again.

Service: Contact Sony support or authorized service center.