Sony Dream Machine ICF-C113 Radio User Manual

The Sony Dream Machine ICF-C113 is a compact AM/FM digital clock radio with dual alarm functionality, large LCD display with adjustable dimmer, battery backup, and easy-to-use controls. It features a built-in speaker, headphone jack for private listening, and a snooze function. Designed for bedside use, it provides reliable timekeeping and wake-up solutions with Sony's signature sound quality. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: AM/FM Tuner, Digital Clock with LCD Display, Dual Alarm System, Built-in Speaker, Headphone Jack, Battery Backup Compartment, Power Cord.

Installation

Unpack and inspect contents. Place on stable, flat surface near power outlet.

1. Insert backup batteries: Open compartment on back, install 2 AA batteries (not included).
2. Connect power: Plug AC adapter into wall outlet and into radio's DC IN jack.
3. Extend antenna: Fully extend the telescopic FM antenna for better reception.
4. Position radio: Ensure it is placed away from large metal objects or other electronics that may cause interference.

WARNING! Do not place near water or heat sources. Use only recommended batteries.

First-Time Setup

Plug in power; clock will flash 12:00.

1. Set time: Press and hold CLOCK SET button, use HOUR and MINUTE buttons to set correct time.
2. Set date: Press DATE button, then use HOUR/MINUTE to set.
3. Set alarms: Press ALARM 1 or ALARM 2 button, set time and choose radio or buzzer sound.
4. Tune radio: Press BAND to select AM or FM, use TUNING buttons to find station.
5. Save presets: Tune to desired station, press and hold a numbered button (1-5) to save.

CAUTION! Ensure batteries are inserted with correct polarity (+/-).

Specifications

• Model: Sony Dream Machine ICF-C113.
• Tuning Range: FM 87.5-108 MHz, AM 530-1710 kHz.
• Power Supply: AC 120V, 60Hz; DC 4.5V (3 x AA batteries for backup).
• Backup Battery: 2 x AA batteries (maintains time/alarms for up to 60 minutes).
• Display: LCD with green backlight and dimmer control.
• Alarm Sounds: Radio (wakes to last station) or electronic buzzer.
• Snooze Duration: Approximately 9 minutes.
• Sleep Timer: 15 to 90 minutes in 15-minute increments.
• Audio Output: Built-in speaker; 3.5mm headphone jack.
• Dimensions: Compact bedside design.

Controls and Settings

Front Panel: POWER, BAND (AM/FM), TUNING (+/-), ALARM 1, ALARM 2, SNOOZE/SLEEP, CLOCK SET, HOUR, MINUTE, PRESET buttons (1-5), VOLUME control, HEADPHONE jack.

Top/Side Controls: Display Dimmer switch (HIGH/LOW/OFF), ALARM MODE switch (RADIO/BUZZER/OFF).

Clock Settings: Time, Date, 12/24 hour format. Alarm Settings: Time, Sound source (Radio/Buzzer), Repeat (Daily/Once). Radio Settings: Manual tuning, Preset memory (5 stations per band), Volume. Sleep Timer: Set duration (15-90 min). Display: Adjust brightness or turn off.

Connecting Devices

Headphones: Plug into 3.5mm jack for private listening. External Antenna: Optional connection for improved AM reception (not included).

1. Ensure radio is powered off before connecting headphones.
2. For best FM reception, fully extend telescopic antenna and adjust direction.
3. For AM, rotate radio or use external AM loop antenna if reception is poor.

Tip: Use headphones to listen without disturbing others.

Radio Operation

Supports AM and FM bands with manual tuning and preset memory.

1. Power on: Press POWER button.
2. Select band: Press BAND to toggle between AM and FM.
3. Tune manually: Press TUNING + or - to search for stations.
4. Use presets: Press numbered button (1-5) to recall saved station.
5. Save preset: Tune to station, press and hold a numbered button until display confirms.
6. Adjust volume: Turn VOLUME knob.
7. Sleep timer: Press SLEEP repeatedly to set duration (15, 30, 45, 60, 75, 90 min). Timer counts down on display.
8. Headphone use: Plug in headphones; audio automatically routes to headphones.

WARNING! Do not listen at high volume for extended periods to protect hearing.

Alarm Features

Dual alarms with choice of radio or buzzer wake-up sound.

1. Set alarm time: Press ALARM 1 or ALARM 2, then use HOUR/MINUTE to set time.
2. Select sound: Move ALARM MODE switch to RADIO or BUZZER for each alarm.
3. Activate alarm: Ensure switch is not set to OFF. Alarm icon will appear on display.
4. Snooze: When alarm sounds, press SNOOZE to silence for ~9 minutes.
5. Deactivate alarm: Press ALARM 1 or ALARM 2 button to turn off alarm for that day, or move switch to OFF.
6. Repeat: Alarms are set to repeat daily. For one-time alarm, deactivate after it sounds.

Note: During power failure, battery backup maintains time and alarm settings.

Care & Cleaning

Unplug from power before cleaning. Use soft, dry cloth to wipe exterior. Do not use liquid or aerosol cleaners.

CAUTION! Never immerse radio in water. Keep away from extreme temperatures and humidity.

Regulatory Information

FCC Part 15: This device complies with Part 15 of the FCC Rules. Operation is subject to interference that may cause undesired operation. Copyright © Sony Corporation. Sony and Dream Machine are trademarks of Sony Group Corporation. For support, visit www.sony.com/electronics/support or contact Sony Customer Service at 1-800-222-7669.

Troubleshooting

Reset: Unplug power and remove batteries to reset all settings to factory default.

Service: 1-800-222-7669; www.sony.com/electronics/support